The TVandNav2Go Chrysler / Dodge /Jeep video interface for 2011-up vehicles with the MyGig radio (note that the phone or call button MUST be in the LEFT corner) will allow you to add up to three video sources including backup camera, DVD iPod video etc to your factory navigation (or no nav) screen. Please make sure that your vehicle has a head unit like the unit pictured below:
The TVandNav2Go interface for Chrysler / Dodge / Jeep vehicles with MyGig radios 2011-up (call button on left side of screen) will allow you to add up to three video sources to your factory navigation screen. You will retain all of your original factory functions while being able to view additional video on the screen. The TVandNav2Go Chrysler Dodge Jeep 2011-up MyGig uses your factory buttons (steering wheel controls) so that everything in the vehicle retains its factory look and feel.
If you're adding aftermarket backup camera, the image will display automatically on the factory navigation screen when the vehicle is put in reverse.
The TVandNav2Go Chrysler / Dodge / Jeep for MyGig 2011-up not completely plug and play, this does require you to open up the radio and replace a ribbon cable and solder a wire onto the board inside the radio. In addition, you will need to get power and ground to the interface. We provide full instructions for installing the interface in your factory headunit.
In addition, since our interfaces are video only, you will need to add something for sound like an aux in, or fm modulator if your vehicle does not have one already.
No customer comments for the moment.