The TVandNav2Go Ford Lincoln video interface for 2011-up vehicles with separate screen (4pin LVDSCD Screen Systems) will allow you to add up to three video sources including backup camera, DVD iPod video etc to your factory navigation screen. Please make sure that your vehicle has a head unit like the unit pictured below:
The TVandNav2Go interface for Ford & Lincoln vehicles 2010-2012 will allow you to add up to three video sources to your factory navigation screen. You will retain all of your original factory functions while being able to view additional video on the screen. The TVandNav2Go Ford Lincoln Interface uses your factory buttons so that everything in the vehicle retains its factory look and feel.
If you're adding aftermarket backup camera, the image will display automatically on the factory navigation screen when the vehicle is put in reverse.
The TVandNav2Go Ford Lincoln 2010-2012 unit is plug and play, however this does require you to open up the radio and replace a ribbon cable and a connector on the back of the screen so you must be able to open the radio and remove the screen.In addition, you will need to get power and ground to the interface. We provide full instructions for installing the interface in your factory headunit.
In addition, since our interfaces are video only, you will need to add something for sound like an aux in, or fm modulator if your vehicle does not have one already.
No customer comments for the moment.