The TVandNav2Go video interface for Peugeot is compatible with the P208 vehicles. This interface will work in vehicles with or without navigation.
Please look at the picture below, your main screen must look like this:
With the TVandNav2Go interface for Peugeot P208, you can turn your factory screen into an entertainment system allowing up to three video sources including backup camera. With the TVandNav2Go Peugeot interface, you will be able to retain all of your factory functions, and your factory system but still be able to add video on the screen. Installation is plug & play, and operation is simple, switching inputs requires pressing buttons on the factory radio.. It's that simple.
The TVandNav2Go video interface for Peugeot is plug and play. There are two installation options, the first that is mostly plug & play allows you to use the factory radio controls to switch between video inputs. This installation option will also allow you to automatically view a backup camera on the screen when the vehcile is placed in reverse without having to connect a wire to reverse lights in the vehicle. This option involves cutting two wires in the vehicle and connecting them to our interface, these are the can hi & low wires that are conveniently located in the same area behind the screen. In addition, 12v ignition power and ground are needed. The second installation option would allow you to forgo connecting the can wires, but you would need to use the included remote instead of the steering wheel controls and if adding backup camera, a wire needs to be connected to reverse lights in the vehicle.
No customer comments for the moment.