Peugeot 408, 508,3008 Video Interface

Peugeot 408, 508,3008 Video Interface

$329.95

Add to cart

The TVandNav2Go video interface for 2009- up Peugeot 408, 508,3008 will allow you to add up to three video sources including backup camera, DVD, iPod video and TV tuner.

More details

The TVandNav2Go video interface for 2009-up Peugeot 408,508,3008 also works on the Citroen C4 C5 , the Alfa Romeo and MG6 all 2009-up vehicles. Thje interface will allow you to add up to three video sources including backup camera, DVD, iPod video and TV tuner. Please make sure that the unit in your vehicle is the same as the one pictured below:

Citroen head unit

The TVandNav2Go interface for the 2009- up Peugeot 408, 508,3008 is plug & play, however the interface needs to be connected via a ribbon cable inside the factory headunit. You will need to be able to open up the radio, remove a factory ribbon cable and connect the included ribbon cable that comes with the interface. In addition, you will also need to get 12v ignition power to the unit and ground. We supply complete instructions on how to connect the unit. Once the interface is installed you will then be able to add backup camera, DVD or any other video source.

If you are interested in adding backup camera, the interface will allow you to connect a wire to reverse lights in the vehicle which will allow the backup camera view to display on the factory screen when the vehicle is switched into reverse gear.

If you are adding a video source like dvd player or iPod video via the TVandNav2Go interface for Peugeot 408, 508,3008 you will need to either use the factory aux inout for sound or, you will need to use an aftermarket aux in or fm modulator.  

No customer comments for the moment.

Write your review

Write your review